Auto-Theologie
help the university theology learn how the car is broken down scientifically and polished so that it refelktiert. But then one of the car-heavy to bring it back to put together. Resulting in total Fahrtuntüchtigkeit.
The Bible school theology takes the car - no matter how old - and "pimmt" back it up.
But the next hill earth shatter the shock absorbers. Top outdoor, indoor flop.
Where is the theology that breaks down, reflect on and degraded in the presence of a sexy car?
Thursday, January 27, 2011
Sunday, January 23, 2011
Play Pokemonon Macbook Pro
23. Januar 2011; Remontagen und Ausbau des Fahrersitz
While others enjoy the sunshine I am put back in my car. Today, there various work to it.
First, I have the brake base plates, which were last revamped in the windshield.
The differential cover the front and rear axle I have screwed with sealant again. The sealant I have uniformly distributed sparsely on both sealing surfaces. Whether it will prove to be even more tightly. But I am confident. fit
To the wooden floor and the carpet in the vehicle had the driver's seat and the shifter for the transfer case out too. The shift lever is in the future get a slightly different form, that he by the driver more accessible.
the rubber bellows I have made clean with dust cleaner.
is already available, the new cover for the bellows. This has made me my friend Matt in stainless steel. Laser Cutter is so cool ... :-) The panel I will later be polished to a shine.
driver's seat is out. And so a new, albeit small construction site appeared. On the driver's seat belt buckle is a contact for a buzzer that will warn when the belt is not fastened. Of which up to now but nothing was heard. Unfortunately
were found under the rubber mat, as in the rear of the vehicle, some superficial rust. These need to be sanded and will be repainted.
time: 3.5h
costs: CHF 38.00 (sealant)
While others enjoy the sunshine I am put back in my car. Today, there various work to it.

First, I have the brake base plates, which were last revamped in the windshield.

The differential cover the front and rear axle I have screwed with sealant again. The sealant I have uniformly distributed sparsely on both sealing surfaces. Whether it will prove to be even more tightly. But I am confident. fit

To the wooden floor and the carpet in the vehicle had the driver's seat and the shifter for the transfer case out too. The shift lever is in the future get a slightly different form, that he by the driver more accessible.
the rubber bellows I have made clean with dust cleaner.
is already available, the new cover for the bellows. This has made me my friend Matt in stainless steel. Laser Cutter is so cool ... :-) The panel I will later be polished to a shine.

driver's seat is out. And so a new, albeit small construction site appeared. On the driver's seat belt buckle is a contact for a buzzer that will warn when the belt is not fastened. Of which up to now but nothing was heard. Unfortunately
were found under the rubber mat, as in the rear of the vehicle, some superficial rust. These need to be sanded and will be repainted.
time: 3.5h
costs: CHF 38.00 (sealant)
Saturday, January 22, 2011
Barbie From The Kelly Family
22. Januar 2011; Vorderachse und Bremsgrundplatten
Today Werkstatttag was very dirty and oily. I have done mostly cleaning and refreshing work.
to the motto "If you're at it," I have now lowered the Differentialoel the front axle and exempt from the sealing surface on the lid and differential of the old sealant.
The base plates of the drum brakes were fully lubricated with thick underbody protection. That I have soaked with gasoline and brushed off. The inside was completely cleaned.
Nachdem die Platten gründlich entfettet waren, habe ich sie mit hitzebeständigem Auspufflack wieder aufgefrischt.
Zum Schluss erhielten die beiden Oeleinfüllschrauben noch ein Facelift.
Zeitaufwand: 4h
Today Werkstatttag was very dirty and oily. I have done mostly cleaning and refreshing work.

to the motto "If you're at it," I have now lowered the Differentialoel the front axle and exempt from the sealing surface on the lid and differential of the old sealant.

The base plates of the drum brakes were fully lubricated with thick underbody protection. That I have soaked with gasoline and brushed off. The inside was completely cleaned.

Nachdem die Platten gründlich entfettet waren, habe ich sie mit hitzebeständigem Auspufflack wieder aufgefrischt.

Zum Schluss erhielten die beiden Oeleinfüllschrauben noch ein Facelift.
Zeitaufwand: 4h
Thursday, January 20, 2011
Can You Have Leg Pain After Ovulation?
20. Januar 2011; Ventildeckeldichtungen wechseln
Ein Schritt gegen den stetigen Oelverlust ist das Auswechseln der Ventildeckeldichtungen sowie der Durchführungen für das PCV-Ventil, die Gehäuseentlüfungt und das Oeleinfüllrohr.
Die Deckel liessen sich mit ein wenig Fummelei demontieren, ohne dass die Drosselklappeneinspritzung und der Luftfilder abgebaut werden mussten. Die Seals still had the shape and color of a just such ... Their function, however, was greatly reduced. They are decaying in the hands almost to dust.
with a fine wire brush I removed all the residue of the old rubber seal.
the new seals and a new PCV valve.
Time: 2h
costs: CHF 85.00 (www.amoparts.ch)
Ein Schritt gegen den stetigen Oelverlust ist das Auswechseln der Ventildeckeldichtungen sowie der Durchführungen für das PCV-Ventil, die Gehäuseentlüfungt und das Oeleinfüllrohr.

Die Deckel liessen sich mit ein wenig Fummelei demontieren, ohne dass die Drosselklappeneinspritzung und der Luftfilder abgebaut werden mussten. Die Seals still had the shape and color of a just such ... Their function, however, was greatly reduced. They are decaying in the hands almost to dust.

with a fine wire brush I removed all the residue of the old rubber seal.

the new seals and a new PCV valve.
Time: 2h
costs: CHF 85.00 (www.amoparts.ch)
Natile Morales On Nbc Haircut
11. Januar 2011; Revision Trommelbremse
After I got while swimming with the inspired idea how I can solve without special tools, the axle nut I went to work. Since the axle nut to be replaced anyway I have it with the grain und dem Hammer gelöst und anschliessen mit der Wasserpumpenzange herausgedreht.
Nach dem schweisstreibenden Entfernen der verklemmten Bremstrommel bot sich mir ein rostrotes Bild. Es zeigte sich, dass zwar nichts defekt ist, jedoch hoffnungslos korrodiert. Die Mechanik der Feststellbremse bewegte sich so gut wie nicht mehr.
Die Teile liessen sich mit einem allseits bekannten Spezialwerzeug voneinander lösen. Dank dem Erfinder des Hammers.
Auch die Rückplatte wurde entfernt um sie dann gründlich von Bremsstaub und ausgelaufener Bremsflüssigkeit zu befreien.
take the brake off. After all visible numbers and markings were listed it was because the spare parts to order. In www.summitracing.com I found all the necessary parts. Whether I have ordered everything will turn out right.
time: Approx. 3h
After I got while swimming with the inspired idea how I can solve without special tools, the axle nut I went to work. Since the axle nut to be replaced anyway I have it with the grain und dem Hammer gelöst und anschliessen mit der Wasserpumpenzange herausgedreht.

Nach dem schweisstreibenden Entfernen der verklemmten Bremstrommel bot sich mir ein rostrotes Bild. Es zeigte sich, dass zwar nichts defekt ist, jedoch hoffnungslos korrodiert. Die Mechanik der Feststellbremse bewegte sich so gut wie nicht mehr.

Die Teile liessen sich mit einem allseits bekannten Spezialwerzeug voneinander lösen. Dank dem Erfinder des Hammers.

Auch die Rückplatte wurde entfernt um sie dann gründlich von Bremsstaub und ausgelaufener Bremsflüssigkeit zu befreien.

take the brake off. After all visible numbers and markings were listed it was because the spare parts to order. In www.summitracing.com I found all the necessary parts. Whether I have ordered everything will turn out right.
time: Approx. 3h
Sunday, January 9, 2011
Manheim Auction Canada Alberta
8. Januar 2011; Beginn Revision Trommelbremse
After I had devoted a Pumi, as we put the Dodge in the garage without blocking is equal to everything upon, and the revision of the drum brake can be started.
This has recently blocked and often times even with the parking brake is not anything wrong. Well ...
jacked up and the rear wheels removed.
The wheel adapter of course had to get away.
were then dissolved the steering knuckles and pulled out a few inches, so the oil could drain off. This would of course been a lot of liquid, the oil would not ice cold. Since the special tool for the axle nut eh does not exist, because the axle nut first had to be measured, the oil now has to drop a few days to.
I decided to change the Differentialoel recorded entirely, if I have the car just as beautiful on the goats have.
differential cover is released and opened a small gap to run to the oil.
The open differential. This still needs to be scraped sealant from the sealing surfaces. A not pleasant work, if they must perform as lying under the car. The decision as to whether the differential cover refitted with a sealant or gasket is still pending.
time: 3h
Cost: CHF 0.00 were
After I had devoted a Pumi, as we put the Dodge in the garage without blocking is equal to everything upon, and the revision of the drum brake can be started.
This has recently blocked and often times even with the parking brake is not anything wrong. Well ...

jacked up and the rear wheels removed.

The wheel adapter of course had to get away.

were then dissolved the steering knuckles and pulled out a few inches, so the oil could drain off. This would of course been a lot of liquid, the oil would not ice cold. Since the special tool for the axle nut eh does not exist, because the axle nut first had to be measured, the oil now has to drop a few days to.

I decided to change the Differentialoel recorded entirely, if I have the car just as beautiful on the goats have.

differential cover is released and opened a small gap to run to the oil.

The open differential. This still needs to be scraped sealant from the sealing surfaces. A not pleasant work, if they must perform as lying under the car. The decision as to whether the differential cover refitted with a sealant or gasket is still pending.
time: 3h
Cost: CHF 0.00 were
Katesplayground Free Streams
Thursday, January 6, 2011
Inurl Multicameraframe?mode-
Video "Twitter user"
Video "Twitter Bedienungsanleitung" von "alexanderplath" bei "YouTube":
Beschreibung der Videos:
Die deutsche Twitter Bedienungsanleitung, einfach präsentiert von Alexander Plath : Wie funktioniert Twitter und wie melde ich mich bei Twitter an ? Wie verschicke ich Nachrichten bei Twitter ? Was sind Follower, was heisst folgen, wie bekomme ich Follower ? Wie schicke ich eine Direct Message (direkte private Nachricht) ? Eine Bedienunganleitung für alle, die Twitter benutzen wollen (twittern wollen) und sich vielleicht noch nicht daran getraut haben ideal auch, um andere zum Twittern to move. So pass on :-)! From
http://twitter.com/erster_eindruck
Video "Twitter Bedienungsanleitung" von "alexanderplath" bei "YouTube":
Beschreibung der Videos:
Die deutsche Twitter Bedienungsanleitung, einfach präsentiert von Alexander Plath : Wie funktioniert Twitter und wie melde ich mich bei Twitter an ? Wie verschicke ich Nachrichten bei Twitter ? Was sind Follower, was heisst folgen, wie bekomme ich Follower ? Wie schicke ich eine Direct Message (direkte private Nachricht) ? Eine Bedienunganleitung für alle, die Twitter benutzen wollen (twittern wollen) und sich vielleicht noch nicht daran getraut haben ideal auch, um andere zum Twittern to move. So pass on :-)! From
http://twitter.com/erster_eindruck
Subscribe to:
Posts (Atom)